Product Name: Carbide Rod
Grade: KU20/KR10Z/KU25/KU409/KU10/KU209/KU30
Diameter: 0.7mm~50mm, accept customization
Length: 330mm/310mm, accept customization
Surface: h6 polished tolerance
Â
Specifications
Â
Features
1. Long life span.
2. Manufacture with advanced automatic extrusion equipment.
3. HIP sintering and precision grinding to ensure the good performance.
4. Blank and finished tungsten carbide rods for your choice.
5. Reach a mirror-effect surface after accurate grinding and polishing.
Â
Applications
 For making the drill bits, end-mills, reamers
Â
Grade Introduction
Grade |
Grain size (um) |
Cobalt content (wt-%) |
Density (g/cm3) |
Hardness (HRA) |
TRS (N/mm2) |
KIC (MPa.m1/2) |
KU20 |
0.7 |
10 |
14.45 |
91.8 |
3800 |
10.5 |
KR10Z |
0.6 |
10 |
14.45 |
92.2 |
4000 |
10.7 |
KU25 |
0.4 |
12 |
14.12 |
92.5 |
4200 |
10.2 |
KU409 |
0.4 |
9 |
14.5 |
93.2 |
4000 |
9.6 |
KU10 |
0.4 |
6 |
14.8 |
94 |
3800 |
8.7 |
KU209 |
0.2 |
9 |
14.45 |
94 |
4200 |
9.2 |
KU30 |
0.7 |
15 |
13.98 |
89.6 |
4500 |
13.8 |
Â
Grade Selection Guide
Grade |
Applications |
KU20 |
Sub-fine grain size, processing by medium speed, good general performance, drill bits and end mills are recommended, suitable for cutting Ordinary alloy steel, aluminum alloy, heat resistant alloy, cast iron, etc. |
KR10Z |
Ultra-fine grain size, excellent heat resistance, suitable for high-speed milling and drilling, especially suit for making overall drill bits. Suitable to process alloy steel, heat-resistant alloy, cast iron, non-ferrous metals, stainless steel and other materials. |
KU25 |
Ultra-fine grain size, with good wear resistant and toughness, especially suitable for finishing and processing alloy steel, aluminum alloy, titanium alloy etc. Suitable for making end mills and reamer. |
KU409 |
Ultra-fine grain size, Suitable for processing hardened hard steel, aluminum alloy, CFRP, high wear resistant material stainless steel, composite graphite, PCB, plastic. |
KU10 |
Ultra-fine grain size, with good wear resistant, higher wear resistant end mills, engraving tool and high mirror polished cutting tool are recommended, suitable for processing Aluminum-magnesium alloy, composite sheet, PCB, plastic, CFRP etc. |
KU209 |
Nano grain size, with high wear resistance and toughness, suitable for finishing of hardened steel, high-precision and high-mirror processing of graphite, plastic, CFRP, stainless steel and aluminum alloy. Suitable for making 0.3-0.5mm drills. |
KU30 |
Sub-fine grain size, with good wear resistant and toughness, suitable for making punching of mould, anti-vibration boring bar and machining low-hardness material with deep cutting tools. |
Â
About Us
Zhuzhou Kunrui Carbide Co., Itd, established in 2011, is a professional engaged in the research, development,sale, and service of tungsten carbide rods, grounded carbide rods, carbide tubes, carbide strips, and other carbide products. Kunrui is concentrated on developing and producing standard and non-standard tungsten carbide rods and tubes with diameters from0.5mm to 45 mm, length could reach 1000 mm.They are full dimensions and rich inventory for each grade. From solid rods to single and double straight holes ones, and then to that with spiral holes, four series, six grades, breaking through the key research of 150-200 Nano cutting tool materials, and we achieved to be always taking the lead.
Â
FAQ
Q: Are you a manufacturer?
A: Yes, we are a professional cutting tools manufacturer, specializing in the production of tungsten carbide rods, ground carbide rods, carbide strips.
Â
Definition of Physical Properties
Hardness:
The hardness of a material is defined as the ability to fight against the hard-pressed into surface of the object, mainly using measurements of Rockwell and Vickers. Â As the principles of the Vickers and Rockwell tests are different, care must be taken when converting from one system to the other.
Â
http://www.kunruicarbide.com/